So in the complete 1350fps HS shell load, three hundred-mp is type of a more sensible choice Along with the each individual so slightly slower burn fee to offer a few much more fps in the load, whilst from the CF hulls at 1200fps, improved off Using the 296/H110 which has The marginally more quickly burn amount to keep the powder burning a contact cleaner rather.



The brand new-type hulls will reload much more times with better crimps than some other .410 hull, As long as you avoid the "new generation" powders such as Alliant 410 and Lil'Gun.

Accurate Powders can be an American company that lives as much as its title. Accurate Powder’s complete line of smokeless powders for handguns, shotguns, and rifles is lab-analyzed/engineered to maximize the precision and overall performance of any firearms.

Two factors to point out as well, little grain powder wants a incredibly hot primer to have it heading (Acquire 209 is okay) and needs Functioning tension to secure a good melt away in addition.

I made use of the self indexing aspect on the 9000G with no issue and constantly have. When you spill any shot, you then can have problems.

The remainder of the powders for 410 loads, Have a very burn pace of all-around 295, and just turn out burning up the hulls promptly to begin with, and won't ever be capable of realize the 1350fps before the ammo goes in excess of strain.




By the way, there is no this kind of issue as being a clean burning powder while in the 410. I've settled on Alliant 300MP as I choose to shoot the minimal gun about 1300 fps. FWIW Invoice

all powder will burn off up hulls but with these 3 I will get six to ten reloads devoid of a problem. Based on the hull preference There may be enough analyzed load data on This page for these powders. Just look for it out you will not be let down.

Powder looks a tad dirty and maybe burns up the hulls a bit faster, I feel (still quickly get five reloads with out excessive shut inspection and sorting-some final for a longer time but need close seem after a few reloads). I’m conservative to the reloads and dispose before than many do I do think. Crimps are great in 99% on the hulls even by various reloads. General I like it sufficient to help keep making use of it.

All extremely true, but still not the tip of the planet to get a novice reloader. My Father normally claimed You must discover how to crawl before you decide to wander. IMHO often we overload the go rookies with TMI.

So when I figured this out, I seperated all the shells from smallest to tallest. I load the little kinds perfectly. I exploit Alliant my site Green Dot powder with small to no challenges. So now I'll do the novice issue and hyjack this thread using a similar problem for any person with information or response.

Now allow me to take it action farther since you are coming out of H110/296 and going into 410 powder. You are likely to burn up hulls at a considerably quicker rate, and could not even much like the 410 loads when It can be all reported and performed (inconsistency).




This really is an older thread, you might not receive a response, and will be reviving an previous thread. Please look at creating a new thread.

We emphasize on the caliber of our coffee as on our high-quality of support, delivering our clients with full overall flexibility to protect their demands always.